Harness the flexibility and intelligence of your KTM’s CAN buselectrical system to make the installation of accessories drasticallyeasier with the new and improved DENALI CANsmart Controller GENII.

The DENALI CANsmart Controller provides plug-n-playinstallation and integrated control of up to four accessories to enabledozens of customizable settings that can be controlled right from your KTMswitch cluster or the CANsmart Accessory Manager Software.

TheCANsmart’s four circuits are preprogrammed to connect and independentlycontrol two sets of DENALI lights, a SoundBomb horn, and our B6 auxiliarybrake light.

Gen II – More Features, More Power, MoreVersatile

Unlike the Gen I CANsmart, all four circuits ofthe Gen II can provide a full 10 amps of continuous power and each circuitcan be configured to run any accessory type. The maximum power draw for thewhole unit remains at 30 amps continuous. The Gen II also features two newauxiliary light settings. You can now modulate your auxiliary lights foradded conspicuity, and set your left and right side lights to independentlycancel when you activate your corresponding turnsignal

Features:

• High/LowSync– Set auxiliary lights to switch between a programmablehigh/low setting with the factory high beam switch.
• ON/OFFand Dim*– Independently control two sets of lights ON/OFF andchange intensity level (for both day and night) right from your originalvehicle switches.
• Modulate Lights– Set auxiliarylights to modulate to increase your visibility to othermotorists.
• Flash to Pass– Need to get someone’sattention? Pulse your high beam switch three times and your auxiliarylights will strobe three times fast.
• Cancel With TurnSignal*– This feature cancels the corresponding auxiliary lightwhen you turn your turn signal on preventing powerful auxiliary lights fromoverpowering your signal.
• Inverse Flashing WithHazards*– This features flashes your auxiliary lights inversely toyour hazard lights, increasing visibility during roadsideemergencies.
• Plug & Play Horn Installation-Quickly and easily connect high-power aftermarket horns like ourSoundBomb without having to add an additional harness orrelay.
• Strobe with Horn– With this featureselected the CANsmart software will automatically strobe yourauxiliary lights when you sound your horn. This feature works whether youhave the factory horn or SoundBomb horninstalled.
• Deceleration Activated “Smart Brake”Technology– The CANsmart reads vehicle speed in real-timeto activate your auxiliary brake light during deceleration before you eventouch the brake. You can adjust the sensitivity and minimum speed at whichthe Smart Brake Feature will activate.
• Flash PatternBraking– The CANsmart provides four different flashpatterns that make our super bright auxiliary brake lights even noticeableto motorists behind you. You can set auxiliary brake lights to only flashunder hard braking, flash continuously as your brake is applied or flashfour times rapidly then hold steady (California legal flashrate).
• Circuit Function Selector-The CircuitFunction Selector in the CANsmart software will let you run any accessoryof your choice on any of the four circuits. Click on a circuit icon to openthe drop-down menu and make your selection from the list of availablecircuit functions.
• Switched Power Source– TheCANsmart provides a universal “accessory” option which simply givesyou clean switched 12V power. That means whatever accessory you connect tothis circuit will turn on and off with your ignition.
• DelayTime Out– You can also set the accessories on this circuit to havea delayed time out. This will keep them powered for up to 30 seconds afteryour turn off your bike.
• On Board Power– The”accessory” circuit option is ideal for powering your GPS, phone, heatedgear or any other electronic device.

Whats InThe Box?

• CANsmart Controller
• (x2) 5.5ftLight Extension Cables
• 5ft SoundBomb Horn ExtensionCable
• Horn Trigger Wire
• B6 Brake Light WiringAdapter
• Zip-ties
• Adhesive Hook-and-LoopFastener
• Micro USB Programming Cable